Quantum Energy Devices

783 East Main Street
Suite B
Bridgewater NJ 08807

(908) 652-6520 phone

(908) 652-6520 fax

©2016 by Quantum Energy Devices.

Designed With Safety As The Priority

MOTOR CONTROL

Our analog motor control has a proven track record on large tours for safety and dependability.

Built To Last Where Others Fail

TOURING MOTOR CONTROL

The Touring Motor Distro range is constructed with self-contained UL-compliant metal enclosures, which can be easily mounted into standard 19" road cases. They all feature mains Cam Lok pass thrus, which are rated for the full capacity of the Cam Lok, with phase Cam covers and test points. The 225A and higher distros have double neutrals. The power indicators are located on the front and back, while the front indicators are both pre- and post-breaker. All products are ETL Listed and built to conform to UL508A.

The 32 and 16 way motor distro have a mains contactor, which is linked to either the E-Stop or the Dead Man on the handset. It is also linked to a Phase rotation detection system, which disables this contactor if there is a rotation problem. This system can be bypassed via a key switch if required. In line with QED design philosophy this contactor is over-rated, since it is in constant use and is a safety component. The default state of all QED's products is "Safe." All products are ETL listed and built to conform to UL1640 or UL508A.


32 Channel 3p
16-100% rated 20a 3Ø circuits, 32 channels outputs
100a main breaker
Cam lok in and thru'. With test points and power indicators
2-Military Spec' signal connector
19"W x 18'D x 28'H

16 Channel 3p
8-100% rated 20a 3Ø circuits, 16 channels outputs
100a main breaker
Cam lok in and thru'. With test points and power indicators
1-Military Spec' signal connector
19"W x 18'D x 14'H

8 Channel 3p Pass Thru
4-100% rated 20a 3Ø circuits, 8 channels outputs
Cam lok in and thru'. With test points and power indicators
1-Military Spec' signal connector
26"W x 11'D x 8'H

24 Channel 1p
24-100% rated 20a circuits, 24 channels outputs
100a main breaker
Cam lok in and thru'. With test points and power indicators
2-Military Spec' signal connector
19"W x 18'D x 28'H

12 Channel 1p
12-100% rated 20a, 12 channels outputs
100a main breaker
Cam lok in and thru'. With test points and power indicators
1-Military Spec' signal connector
19"W x 18'D x 14'H

Standard Options
7 pin Socopax outputs
7 pin Veam compatible outputs
19 pin Socopax compatible outputs
Double Hubble outputs

Built in Rugged Cases For The Touring Environment

MOTOR CONTROL REMOTES

The Motor Control Remotes feature simple control circuitry with top quality components housed in highly visible rugged cases. They also include military standard ¼ turn contactors. Both the 8-way and 16-way use a single 16-channel connector while the 32-way uses two 16-channel connectors. This makes the remotes fully interchangeable between the distro units.

The large format motor controller has a double-safety feature, and is available with either a Dead Man or E-Stop system. A low voltage relay only allows power to the control circuits when the Dead Man ('GO') button is pressed on the remote handset. A high-current contactor is wired either to the E-Stop or in parallel with the Dead man system. This means that both power and control are removed from the motors when either the Dead Man or the E-Stop system is engaged. The smaller 8-way controllers feature the low voltage relay.

Standard Products
32-Channel Controller
16-Channel Controller
8-Channel Handgrip

Small Frame Designs and Test Gear

SMALL MOTOR REMOTES

QED is sensitive to the needs of smaller motor applications and cost effect test devices and addresses these needs through the iQ Series Hoist Controllers and Motor Control and Cable Tester.

iQ Series Hoist Controllers includes the new MC 4-Way 3Ø Hoist Controller – perfect for small motor rentals. The ETL listed MC 4-Way is a complete motor control and power distribution system, packaged in a rugged Pelican case. The NEMA 1 enclosure is a simple, cost effective solution that is available in both 1Ø and 3Ø phase versions. The unit is built to the highest construction standards, using over-rated components, a QED standard practice. Neatly loomed with high-temperature wire, all connections are clearly labeled for reliability and ease of maintenance. This self contained system means that there are no pesky external accessories to keep track of.

With seven-pin SOC, seven-pin ¼ turn Veam and Double Hubble output connectors as standard outputs, a 100% rated main breaker, and a real mechanically linked phase reversing contactor – rather than two cheaper contactors tied together and internally fused - the compact MC 4-Way is a must-have component in your motorized rigging inventory. Click here for full details.

The Motor Control and Cable Tester is compact, rugged and cost effective. The tester is used to test the presence of each leg of 3Ø power, correct phase rotation, direction control and signal verification.

All of QED's products are built to the highest construction standards. The internal wiring is loomed and labeled to allow ease of maintenance and inspection. Only high quality components are used throughout. The format, design and layouts are based on years of touring and show experience, taking into account space and power demands. The construction and finish are designed to protect your investment during years of use in the demanding field of portable power distribution.


All QED distro's have the following features in common.

1. Built to conform to or exceed NEC, and UL 1640 portable power distribution standards.

2. All branch current breakers are 100% output rated hydraulic magnetic. These breakers are 100% duty cycle rated at their specified current rating.

3. All internal wiring is 125 deg C rated.

4. All products are finished with a durable epoxy powder coating or anodized aluminum.

5. Power indicator on both the inputs and outputs.

6. Cam lok covers on the phase outputs.